You are reading a single comment by @stelfox and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
stelfox
What size seat post clamp will I need for a Strael v3? The design notes state;
Reynolds 853 Seat Tube
853 - 28.6mm/29.8mm - 0.9/0.6/1.2
We use a standard butted seat tube designed for a 27.2mm seat post. The
majority of the tube is 28.6mm in diameter, where as the top section is externally
butted to 29.8mm to give the correct inner dimension for the seat post and
to provide extra surface area for the top tube and seat stay welds. The tube is
butted 0.9/0.6/1.2.
So i guess that means 29.8mm, could I get away with a 30mm clamp?