You are reading a single comment by @pifko and its replies. Click here to read the full conversation.
  • Any got experience of replacing handbrake cable on a Skoda roomster / Fabia?

    My self-adjusting yoke is being pulled at such an angle that the cable is pulling out of it, bodged with a zip-tie for now, don't worry I'm not driving it like this!

    My question is whether this can be fixed without completely replacing the cables? Looking at the part and a few videos it doesn't seem like there's anywhere to adjust tension - they just have welded ferrules on both ends.

  • I had the same with my VW earlier this year. The issue might not lie with the cable, but instead with the handbrake mechanism by the rear calliper that provides tension to the cable. Corrosion usually prevents it from returning back to its proper position, resulting in the slack cable.

    https://www.youtube.com/watch?v=JnGfPQKLR7I

    Could also be an issue with the calliper itself.

  • Cheers, I hadn't thought of that, and it seems likely that's the problem. Either that or it's snapped further down the line. If I can get access to the back of the caliper with the car where it is I might try a careful squirt of penetrating oil and see if it frees it up for a bit.

About

Avatar for pifko @pifko started