You are reading a single comment by @Retro_Bastard and its replies.
Click here to read the full conversation.
-
Or just buy my custom gravel rig 😉
The lauf doesn't mess with the geo on this as the a2c is 405mm on the stock fork. Whats 6mm & 1/8°? I certainly couldn't notice that small a difference all you'll notice is comfort. I've no way of measuring any sag on these but on the drops it does sit down a little bit. The bar height isn't that aggro either with the 150mm headtube. I used to run a 120mm neg 20° stem on this when I wanted it racey. Anyone used one of these before? https://www.ebay.co.uk/itm/384598592655
Retro_Bastard
I've done the bikecad maths. I could make them work for me. They have a 411mm a-c so you can have your bars quite a bit lower which just means a custom geo gravel rig with a short head tube.
I'm going to try and start saving for a house though so maybe you should get a custom gravel R I G and do it instead.