You are reading a single comment by @TimmyP and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@TimmyP
Got some stuff I need to shift as I am having a bit of a clear out prior to getting a knee op.
First up I am selling a 3T front wheel for rim brake only. It's a great wheel in really good condition. There are a few scuffs to the stickers but no damage to the paint and very little wear to the braking surface. I probably only did 500km outside on it. Comes with rim tape and a skewer. These were over £500 a pair so grab yourself a bargain at £35
Below is the text from the 3T website
25 mm aluminum-alloy rims with welded joint ideally support fat, race-weight clincher tires at lower inflation pressures, for more grip and comfort. 3T linear+ system optimizes build quality; spoking is 20 front with internal inverted nipples. Rims 32 mm deep, with a blunt profile for stable aerodynamic performance at typical angles to the wind. These are light for such a durable, all-conditions wheelset. Benefits for the rider include:
– wider contact surface
– less rolling resistance
– reduced incidence of punctures
– better handling control
I am also selling a Charge Blender jump/4X bike.
I bought it a few months ago but unfortunately injury means it's got to go. I've given it a decent overhaul, swapping the stuff that was past its best or broken except it came with an undersized seat post. Ok if post is slammed as pics, but will need a 27.2mm post if you want any showing. I was going to paint it as the rattle can paint job needs an update, but structurally the frame is sound.
Spec:
Bontrager rims on Shimano Deore hubs. Tyres are a High Roller up front and an Ardent on the back.
It's got a Kona P2 fork.
Cranks are Deore with a chain device to tension the new chain. It's got a 32t ring up front and a 16 and 13t cog on the rear, set up as Single Speed.
There's a nice Surly seat clamp
Clarkes brakes with 160mm rotors with plenty of life in the pads.
Nabbed the risers for another project so they are now a bit narrower - better for bar spins maybe??
Looking for £90
Frog 52, standard spec in Joanna Rowell Union Jack paint job. Scratches to paint as you would expect as it served 2 kids, but fully working and structurally sound. Seem to go for £150-200 on eBay so £125? Currently in the loft but will get it out for more pics soon.
Also got an Andy Stand that's no longer needed so free with any of the above.
Thanks
More photos on request
5 Attachments