• Yep, hopefully will be in the not so distant future when I can figure out some small problems.

    Not 100% sure about the BB length to be honest, have tried googling to no avail - only specs for the new gen of Centaur.

    Good shout on the crank, will double check!

  • That is a cracking looking bike! It is going to fly I'm sure.

    BB length should apparently be 111mm for Centaur double.
    https://thecycleclinic.co.uk/products/campagnolo-centuar-bottom-bracket

    Note also that Campagnolo/Tifosi BBs are ISO taper. Shimano and basically all others are JIS. They are not interchangeable. So a 111 mm JIS (Shimano) BB will put those cranks in a different position when compared to a 111 mm ISO (Campagnolo) BB.

    Also just double checking - are you using carbon-specific brake pads? If you need to buy some I can recommend Swisstop yellow pads.

  • Sheldon would disagree about the non-interchangability of Shimano and Campagnolo tapers, but he's dead.

  • Thanks!

    Ok amazing, I think I have a 111mm about so will try it. I'll keep in mind ISO/JIS as well, thanks for the heads up.

    And yes, got some Swissstop Flash Pro's

About

Avatar for Ndeipi @Ndeipi started