Dynamo Lights

You are reading a single comment by @ILb and its replies. Click here to read the full conversation.

•

C4r1s in reply to @ILb

Ah ok, was hoping you’d managed to get the qr cleat system working which is what I was wanting to do so I can switch it between bikes.

At the moment very similar, sawn off bit of disk brake adapter to underside of Revo, then that bolted to a B&M fork mount. Solid but it’s certainly not QR, and I want the Revo to be able to be used across a couple of bikes in the future.

•

ILb in reply to @C4r1s

Ah fair, it would only be one bolt to remove the light so it's likely quicker than your current set up.

I think if you used the cleat end of this https://www.exposure-use.com/Brands/Exposure-Lights/Products/Bike/Brackets-and-Mounts/Action-Camera-Stem-Cap-Mount-with-Light-Mount and the Supernova mount you'd be in business. But that's almost £100 on mounts for two bikes, depends how often you want to swap I guess...

•

C4r1s in reply to @ILb

Hmm good shout. I’d had it bookmarked but wasn’t sure if it’s fit. I have a spare supernova mount, and the other bike the Revo would be mounted on the bars so not actually that much of an outlay… may be worth a try!

About

@ILb started