-
Ah ok, was hoping you’d managed to get the qr cleat system working which is what I was wanting to do so I can switch it between bikes.
At the moment very similar, sawn off bit of disk brake adapter to underside of Revo, then that bolted to a B&M fork mount. Solid but it’s certainly not QR, and I want the Revo to be able to be used across a couple of bikes in the future.
1 Attachment
-
C4r1s
-
Ah fair, it would only be one bolt to remove the light so it's likely quicker than your current set up.
I think if you used the cleat end of this https://www.exposure-use.com/Brands/Exposure-Lights/Products/Bike/Brackets-and-Mounts/Action-Camera-Stem-Cap-Mount-with-Light-Mount and the Supernova mount you'd be in business. But that's almost £100 on mounts for two bikes, depends how often you want to swap I guess...
ILb
Got a supernova mount and an exposure go pro adaptor - had to drill out the adapter to size up from 5mm to 6mm to accept the supernova torx bolt. Haven't done much riding but it seems solid.
How are you mounting yours ?