You are reading a single comment by @user69121 and its replies. Click here to read the full conversation.
  • Yup - we're getting it templated and made accordingly. Doing it just with the legs would raise the worksurface quite a bit, we'll have to do some investigating. Plus, the depth of the worksurface itself would then start to interfere with the window, so I think some recessing is needed whatever height we choose.

    You'll need a deeper worktop than normal, or have a long joint across the width of the window.

    @user69121 indeed - as we're getting it cut to order they'll hopefully be able to do it in one, but otherwise a joint should be fine. There's a bit further below that mitre, and it looks like (from what I can see on the outside) that it's sitting directly on the brickwork.

    I'll lift a tile and see what I can find.

  • There's a bit further below that mitre, and it looks like (from what I can see on the outside) that it's sitting directly on the brickwork.

    There's around 15 - 20m of frame below the mitre. The frame is then sat onto a cill profile which probably has an upwards lip on the inside. Similar to this.
    https://www.modernupvcwindows.co.uk/extra-upvc-cills.php

    You could have enough window/cill to play with, but your quest for a neater worktop may look more untidy

About

Avatar for user69121 @user69121 started