You are reading a single comment by @MisterMikkel and its replies.
Click here to read the full conversation.
-
You can run a clutch rd without at nw chainring just fine. Just don't downshift more than a couple of gears while coasting.
I've run that setup on my own and my SO's bikes.
MisterMikkel-
excellent, thank you
will be getting one of these
https://www.bikepunx.com/5-x-130-bcd-stainless-chainring-2mm-thick-1806-p.asp
Maj
this spanner is for my brake nuts, not my axel nuts, that little plier spanner looks cute.
can i use a non narrow wide chain ring for a road bike with a clutch rear mech? should be fine? biggest bump it's going to take is a kerb
they're 130 bcd and finding a 38t narrow wide chainring is hard/ expensive for the fractional gain it will give me over 42, but also the idea of buying a bb, bolts and ring, swapping it all on the 110 cranks i have is too much time/effort/money , although would allow me to use a 34t
the other option is buying ANOTHER 104 mtb crank, spacers and a 30t ring and have the same, ideal set up on all my bikes