You are reading a single comment by @NickCJ and its replies.
Click here to read the full conversation.
-
- Clamps / glue
- Jointing jig (dowel / biscuit etc)
If you are OK with a pretty average finish, couldn't you get away without these? Start with a large enough piece of MDF or a larger cupboard door that you chop the top / bottom / sides off. Maybe glue or nailgun a batten on the back to reduce warping?
- Clamps / glue
NickCJ
I would doubt you'd get a presentable finish with a jigsaw.
At minimum, you'd need:
If you're thinking of hiding the Beam in there, you'd need some acoustically transparent material to go on the front.