You are reading a single comment by @Acliff and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Acliff
Frameset is immaculate, for small people like me.
I'll check size, but its XS, 47cm seattube I believe.
Yellow, white, black, Scott HTC-highroad team colourway.
High-mod HMX carbon, only difference from the HTC team frames was that they had an integrated seatpost.
Frame is 883g including pressfit BB (which was 53g), Fork 351g (less now after trimming steerer)
34.4g seatpost clamp and really heavy bottle cage bolts.
BB86 bottom bracket, I have a PF30 conversion bb in there at the moment.
31.6mm seatpost diameter. I've been using 27.2mm with a shim.
It is electronic gearing or singlespeed conversion only! So di2 or etap only.
It has external cable routing for the rear brake, and external routing for the rear derailleur wire (from back in the 7900 di2 external battery era).
I had it built in a tasty Sram red etap build like photos attached.
Unfortunately its surplus to requirements, as I'm aiming to get the Sram red on my Sworks SL6, and reduce the number of bikes I have to the number of hooks I have in the garage.
Won't be very upset if it doesn't sell, as I'd keep it as a project hill climb bike, but seems a shame to have it lying around in storage.
£500
(Near Southampton for collection or meetup, otherwise can consider posting)