You are reading a single comment by @user69121 and its replies.
Click here to read the full conversation.
-
Where the affected temp and motion sensors are within your zigbee network may have an effect on them.
If they are a long way from the hub. We're they using an intermediate (node) device to connect and have you switched that off.
If they themselves are being used as intermediate nodes, is that draining their battery prematurely.
Is HA switching the heating on/ off as a set temperature. On at 18. off at 21.
Or on below 18. Off above 21?Could you have secondary triggers from the same sensor, or an additional one, a degree either side?
user69121
What temperature/motion/contact sensors are people using in their home assistant setups? I picked up a handful of sonoff zigbee sensors and after a couple of weeks of running steadily I had one motion sensor and one temperature sensor drop out last week, and concerned any other drops might cause complications with some automations (particularly a temperature sensor linked to my central heating switch).
Preference is for an off the shelf solution as the diy esp based sensors can be a bit unsightly without access to a 3d printer. Not too tied to protocol, open to WiFi, zigbee or rf.