You are reading a single comment by @Ndeipi and its replies.
Click here to read the full conversation.
-
Why do you want to brake while using the extensions?
If you want to slow down, you sit up and if you want to slow down more you grab the brakes on the basebar.
-
Brake levers must be secured to the handlebars in such a position as to enable the competitor to readily apply both brakes whilst holding the handlebars at their widest point. The width of handlebars shall be no less than 35 cm
-
Use any lever thats larger than your bullhorn's diameter, and then a shim/spacer.
If you send dimensions I'll make one for you. See on my "going out to drink aperol spritz in London Fields" bike:
Drop me a message if you need one made. If you'll be using 31.8mm oversized ones, I could make it eccentric so it has space to guide the cable of the shifter too.
hippy
gbj_tester
kiskubai
@Ndeipi
Anyone know an affordable option for clamp-on TT brake levers that still leave space for a bar end lever? The Jtek levers below are £40 each from SJS.