Home DIY

You are reading a single comment by @Grumpy_Git and its replies. Click here to read the full conversation.

•

Trunkie in reply to @konastab01

But why would there be no voltage before the trigger when it’s pulled?

•

Grumpy_Git in reply to @Trunkie

I would unplug and do a continuity test across the switch for each pole.

I assume you are getting zero volts as the switch is shorting the two lines (through the motor) have you checked the brushes?

•

Trunkie in reply to @Grumpy_Git

After dismantling the whole thing it turns out the cable was dodgy. Don’t know why I didn’t test that first!

About

Avatar for Grumpy_Git @Grumpy_Git started