You are reading a single comment by @Skant and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Skant
I started work on this around March/April 2020, lockdown here in Berlin so spent a lot of time keeping busy in the workshop and initially it came together pretty quickly. Didn't document making the front triangle but there's plenty of that in other threads.
The rear triange:
The eagle-eyed amongst you will see I've marked out a knobby 45mm tyre but I've given it a ton of room to allow for a 48 with mud clearance, similar to the fork
Making and mitering the flat mount brake mounts:
Did a quick dry fit and it was tight getting the dyno cable through the stay past the mount so I milled a little notch in it to make things easier down the line:
And finally brazed in the internal routing:
