• Yes, you’ll need an oven housing. Albeit this is basically an empty car as on 4 legs as you say. At a pinch you could knock something together?

  • Oven would have a housing

    in IKEA land then this
    https://www.ikea.com/gb/en/p/metod-base-cabinet-for-built-in-oven-sink-white-70213569/

    with this metal tray for the oven to sit on
    https://www.ikea.com/gb/en/p/utrusta-bracket-for-oven-galvanised-10301960/

    I'd think you could just leave a gap and pop one in later. It's nothing fancy, just a housing. Could even grab an IKEA/B&Q/whatever one nearby as they'll all just be standard 60cm wide things

    Dishwasher I don't think has a housing, that just has the custom door on the front and it sits on the floor, unless you've got an odd dishwasher

    sure the dishwasher doesn't have legs on the underside that screw in/out to raise and lower it?

  • I assume your oven is at low level and not at waist height/part of a tall unit? Regardless, you will definitely need an oven housing and can't get away with legs alone to the underside of the oven. It is unlikely that you will see the carcass once fully installed although product depending there can be a dummy panel/door underneath.

    Ease of installation depends on your oven output and whether it needs to be hardwired. If not, I don't see why your electrician couldn't install to get everything working and then unplug until the carcass is delivered in place.

    Nothing is needed for the dishwasher. Fits into an open space (45cm in your case) with worktop and kickplate running past. You may need to have a notch in the kickplate to allow the door to open but that's relatively straightforward.

About

Avatar for CYOA @CYOA started