You are reading a single comment by @doug1e and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Dexter
jono84
@doug1e
Another Covid christmas meant I got around to fitting all the slowly amassed new/old parts on the ammaco. I massively improved chainline with a narrower BB - 107 this time the narrower of the recommended width for this crankset, it still doesnt look perfect and ideally I would move it in further but I think theres only a milimeter or two narrower before the crank arm starts to foul on the BB. The Non-drive side cup was wider on this BB and wouldnt go in all the way even though the shell was freshly chased ahhh the fun.
1x9 XTR working great with the stridsland bling and a 6 speed chain. Mavic/XT wheels and XT cranks.A new 21.1mm quill to allow me to run the 25.4mm Azonic risers. It was supposed to be silver but turned up black, I am thinking of stripping the paint and sealing but would inevitably go rusty. Excuse the saddle angle, will take some nicer photos one day.
4 Attachments