You are reading a single comment by @Tijmen and its replies.
Click here to read the full conversation.
-
I will put in a m6 boss on the underside of the stem allowing me to make a bar bag cage/support later on that will tripod between the m6 thread and the two protruding bolts from the face plate. This bar bag cage will then have a little dynamo mount so I can move the light out in front of the bag
👋
By then I hope to be able to silver braze a boss on my MV stem myself, I would be very interested in this.
Tijmen
I have been working on a little concept for a stem and stem mounted Son Edelux 2.
I'll use longer bolts for the stem than I normally would and piggy back on the protruding threads bolting on a little plate that has a m6 threaded rod welded onto it. Then I can just use the bracket from the dynamo light and remove easily if I wanna run a bar bag.
I will put in a m6 boss on the underside of the stem allowing me to make a bar bag cage/support later on that will tripod between the m6 thread and the two protruding bolts from the face plate. This bar bag cage will then have a little dynamo mount so I can move the light out in front of the bag