You are reading a single comment by @Bobbo and its replies. Click here to read the full conversation.
  • I've no idea. It's crumbling in places. I'll lift up one of the boards today.

    Things that put me off breaking it and pouring something level in:

    1. noise / mess / chaos
    2. danger to life / mortgage
    3. how long it would take to set a replacement before putting heavy units on it.
    4. juggling act of doing this work with a plumbed in sink/gas hob/electric oven still in the room as I probably couldn't get those trades out sooner than they're penciled in mid Jan.

    I reckon I can get rid of kiddo and my wife for about... 7-10 days while I do the really chaotic stuff.

    The stone people are coming to template on the 26/01/2022
    Units arriving for me to install w/c 17th
    Not chosen appliances yet

    Basically it's all getting rather real and I have 4 weeks to make a decision and act on the floor / removing the wall tiles / repairing and painting / skirting etc.

  • I honestly think that you need to get a professional to come and see check things before committing to taking out that concrete no matter how tempting it is.

    Concerns I would have:

    1. The property is built into a hill you say. The external wall could be acting as a retaining wall taking out the concrete could remove some support, especially if the foundations are less than optimal for example in a building of that age they could be no more than spreader corbels (or worse no foundations at all).
    2. Are there any services under the concrete?
    3. Even if the other two are not an issue from what you describe there could easily be other issues and there is no way of knowing this until you start the work

    I know you have deadlines looming but how hard are these?

    In your situation I would want to get the opinion of a structural engineer. At the end of the day by spending a few hundred quid now you will be covered by their professional indemnity insurance should things go horribly pear shaped.

    From all I have seen from the situation the best case scenario is the concrete is only a bit of blinding and you can break this out dig down and sort the floor. The other scenarios could be catastrophic. Alternatively as has been put forward by @Airhead scribe the floor "flat" with hardboard.

  • Yep, the hardboard/ply method was always and remains the front runner. Agree with all the above and despite my bluster am unlikely to take out a floor without due caution and checking. Haven't had time to pull floorboards today but will aim to this week and take it from there.

About

Avatar for Bobbo @Bobbo started