Cannondale SuperSix Evo Hi-Mod weight weenie sled

You are reading a single comment by @Netakure and its replies. Click here to read the full conversation.

•

clockwork_killa in reply to @Glws

According to Rotor their BB30 spindle should work with PF30 or BB30a and if not then one of their other spindles certainly will. Carbon Aldhus with a direct mount Gabaruk chainring would be seriously light too, wonder if it would be possible to ask Gabaruk to make one?

•

Netakure in reply to @clockwork_killa

You can use rotor direct mount rings. Or get sram red DUB and an aftermarket DM 1x ring, but you'll need a bottom bracket too

•

clockwork_killa in reply to @Netakure

I've got a Red AXS crank with a direct mount Gabaruk chainring on my Curve, much lighter than any of the stock Sram chainrings and much nicer looking. I was hoping I'd be able to have the same set-up with the Aldhus if I end up going that route but Gabaruk only seem to make DM rings for Rotor MTB cranks and not road.

About

@Netakure started