-
• #2
If you find something with a DT Swiss rear hub and need a campag conversion shout as I have a campag freehub spare
-
• #3
.
-
• #4
38mm Gigantex carbon tubulars?
FRM carbon hubs with carbon axles, CX Ray spokes 24/20, comes with both Shimano and Campag freehub bodies, the lockring (which works for both bodies) is for a 12T starting sprocket however and the lockring is specific to these freehub bodies. (I've included a pic with an 11-28 so you can see how it's a little shy of working.The bodies are in good condition and very easy to swap over, the Campag body has some very minor indents, the Shimano body a bit more bite marks but still nothing major, I also filed the Shimano one at the back end half a mil so it could take 11 speed but the Campag body is 11 speed as standard as it's a 9/10 speed body which works with 11sp.
Rims are lightly used, I was using Swiss Stop with them but I have a full set of new TRP carbon pads but think they are for Shimano holders.Come shod with 22mm Conti GP4000 SII tyres in great condition. Weight is circa 1380g, just under 1950g total with the tyres. Not the lightest compared to the newer stuff but these rims are properly solid.
The rear when spun in hand there's a bit of imperfection you can feel in the bearing, I have replacement bearings in hand to include for both sides of the hub, on the bike I couldn't notice anything, there's no play and the wheel spins up fine - circa 2 minutes from a firm push on the spokes in hand to standstill. Front is smooth as butter.
No skewers.
£340 incl postage, £320 collect N.hertfordshire
3 Attachments
Think Hyperon or Hyperon Ultra
or your Kinlin x Hope 20/24 type build would be good.
around 1600 / 1500g would be nice.
rim