You are reading a single comment by @owl and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
owl
Yep that's what I did, I went for 15mm for the doors but would go for 18mm if I'd do it again. 15 works but your margin for breaking through is very thin, if you look closely I had to patch up the lower left corner. I had the top sawn at the same place I ordered the doors, just took the full width and depth + door thicknes + a couple mm for good luck. I left the sides white as you hardly see them anyway, but would be easy enough to cover. I reckon I'd glue them on, but I don't know shit about woodwork so maybe that's a horrible plan.