You are reading a single comment by @Dramatic_Hammer and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
Dramatic_Hammer
If it's smooth glass I would use a scraper to cut it off the glass and remove and last bits of residue with a wipe (alcohol or wonder wipes). The scrapers of this style are my preference :-
https://www.toolstation.com/stanley-window-scraper/p70065?store=LA&utm_source=googleshopping&utm_medium=feed&utm_campaign=googleshoppingfeed&mkwid=_dc&pcrid=558571386879&pkw=&pmt=&gclid=Cj0KCQiAhf2MBhDNARIsAKXU5GSh0Qwgo6KZl6NIYlZOZm9sPBaSOufuZg7kchkbCVQEHq786UEZSiYaAkLEEALw_wcB&gclsrc=aw.ds
As others have said, you need to be careful and cut between paint and tape to retain the edge of the paint. If it's exterior and properly taped it should have a 1 - 2mm gap between the woodwork and tape which is painted as this helps the paint to protect the woodwork.
I don't carry or use a hairdrier in my tools so I can't say if that works better.