Electric bikes

I second all of this.
Had numerous mates who run shops around UK and Europe, many have ditched Tern has a brand permanently over their behaviour. Its not just the GSD, but quite a lot of their bikes.
If you get a good one, or your dealer is decent and sorted out the issues before it was handed over to you, great, they are well designed and people really like them.
If you just got drop shipped one in a box and put it together yourself, your experience was probably different.

Main reason I see that Tern/babboe /insert names of others like this, don't get a bashing online is... Most of their customers don't know any better, they expect its normal to ride around on a bike which rattles, clangs, rubs and only works in one gear, they don't have the knowledge to diagnose or fix an issue and are quite happy just rattling along at 8mph for years. With these (these are the ones that I see!) it becomes the poor bastard bike mechanic who you dropped the bike in with for a "quick service of a new bike", that has to find all these issues one after another and phone you multiple times, each call worse than the last.
I have had two with cracked frames, many with holes in the frame from lack of weld penetration (looked like weld was a boggle on top of the tube and fell off), many with bent drop outs so then the bolt through axle gets stripped (by me trying to remove the damn wheel), bb cluster welded in wonky so the entire drive unit sits or constantly comes loose from the frame. Headsets made of gravel, from new. Etc. Could go on for ages,you get the picture. Some of these things ate normal with mass production mid quality bikes, some of these things are very not normal and Terns response to them has been "never heard of that, must be something you've done to it" instead of "shit, can't believe a bike with a bent frame and naff welds made it out of the factory, through a dealer and to an end customer in that state , give us the customers details so we can fix this situation fast". Which is what R+M have just done they have an issue with the new Packster 70 which only came out 6 months ago, they've completed a very aggressive recall /buy back of all affected bikes, hats off to them, very brave and well executed.

Hell that was a rant. Basically I and many others are just a bit fed up of total shite permeating our industry, then leaving customers sore and being wary of buying actual good stuff or ever trusting anyone in a bike shop again.
Remember being accused of sabotage of one particular gsd that came in with brake pads worn through the backing plate (rotor trashed too) due to seemingly the rear wheel being run totally loose from the hub bearing cap/freehub nut being loose. Was a nice chunk missing from frame on one side from tyre wear. Bike had 300 miles on it