You are reading a single comment by @swmlon and its replies. Click here to read the full conversation.
  • Most likely they are the ball-o-fix valves on the tap supply so yes. You will probably need some kind of tap spanner to undo the nut behind the sink bowl though.

  • Cheers. I've got the spanner to undo the nut holding the tap to the sink. Got it before when the builders who put all together didn't tighten it down. Right, off to the local plumbing shop.

  • Would recommend a tube of LSX while you're there, will save messing about with the compression fittings.

About

Avatar for swmlon @swmlon started