PC Tech Thread

You are reading a single comment by @ectoplasmosis and its replies. Click here to read the full conversation.

•

spotter

Found this on AliExpress

Which should be ideal when combined with a Silverstone magnetic fan filter and another Noctua NF-F12 for a grand total of 8 Noctua fans

3 x NF-F12 pulling air in at the front
2 x NF-A12 on the CPU cooler
3 x NF-A14 venting out at the back / top

wow beige and brown, much airflow in non-airflow case

•

ectoplasmosis in reply to @spotter

Beware having grilles this close to fan intakes; this will produce a lot of turbulence and noise.

Do these cages have mounts at the rear? If so, you’ll need to seal all gaps between the grille and fan intake to prevent recirculation currents.

•

spotter in reply to @ectoplasmosis

I'm going to cut the grill out just leaving the edge and then put a magnetic dust filter over the top - Currently intake is 2x120mm like this atm, and, exit is 3x140s with grills and dust filyers; they're barely audible unless under heavy load.

About

Avatar for ectoplasmosis @ectoplasmosis started