You are reading a single comment by @Eeyorecore and its replies.
Click here to read the full conversation.
-
ive installed fenders on one of these. I used
- canti post rack bolts: https://velo-orange.com/collections/rack-hardware-and-accessories/products/canti-brake-rack-mounting-bolts
- r-clips: https://velo-orange.com/collections/fender-parts/products/vo-r-clip-4-pack
- and a cut down fender stay that just looped from one canti post to the other.
EDIT: this was the original hack, but when it came into my shop I "fixed it" https://www.instagram.com/p/BQWQlVBjdw4/?utm_source=ig_web_copy_link
- canti post rack bolts: https://velo-orange.com/collections/rack-hardware-and-accessories/products/canti-brake-rack-mounting-bolts
Eeyorecore
Proper mudguards on this, is it at all possible? I'd like to stick a set of 45 Bluemels on (tyres are 38c) but clearly there are a few issues:
No eyelets - hoping that's an easy one to solve with some of these VO bolt on eyelet mount things?
No rear brake bridge mount - I'm thinking a p-clip around one of the seat stays, might be tricky to get it centred but hopefully doable?
tight clearance and no chainstay bridge mount - make a couple of holes in the guard and zip tie around seat tube? There's about 6mm at the tightest point so hopefully just about enough to clear.
Front one should be easy enough but rear seems like a right faff. Thoughts? Any better options?