I have a Ryde Andra 30 rim on a LX T610 front hub (rim brake only)
Could I change out the hub for a disc LX equivalent without replacing all the spokes?
First foray into rebuilding a wheel, and unsure of the tolerances allowed on spoke lengths. Shimano spec table with diameters in below.
PCD 4mm smaller and wider flange spacing = 2mm longer spokes
Is it prevailing thought that 2mm difference is outside the recommended tolerance for spoke lengths?
Only if radial. For tangential spokes, flange diameter makes much less difference than that.
@dubtap started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
I have a Ryde Andra 30 rim on a LX T610 front hub (rim brake only)
Could I change out the hub for a disc LX equivalent without replacing all the spokes?
First foray into rebuilding a wheel, and unsure of the tolerances allowed on spoke lengths. Shimano spec table with diameters in below.