E54s Quiver (Cervélo T1 completed)

Spec

1 Attachment

there was tape on there?? Genuinely didn't even spot that, nice to see you're giving it some love :)

Question on your spinergy, have you serviced or replaced the freehub?

Looking to get mine replaced as the old freehub that came with spinergy seems to be on its last legs and looking at alternatives.

Hah

Funny that you ask…

Maybe one step back first: i purchased one pair of spinergys off of an older lad from ebay classifieds and he assured that this wheelset had only been ridden a few hundred kilometers and only on dry sundays (YUP!)

well, After I replaced all regular bearings i noted that it is the freehub which still felt pretty rough

After opening it, i noted that there wasnt any grease left but only brown mud that had been in there for what I would expect severeal thousand kilometres

Long story short, i am also looking to replace the entire freehub because only replacing the balls would not suffice in my case. The bearing cups have suffered too much

I would hope that a generic shimano 8-10 freehub would work, but I am yet to find out…

I will let you know once I had the time to try it

1 Attachment

I’ve got a broken 26”rear spinergy, maybe you could salvage the freehub off it? One of the spokes is damaged so it’s just gaining dust in the corner if it’s any use hit me up lad

eBay sellers hey?

I have been doing a lot of research on this issue and it was ither service the run down freehub or look for an replacement.

Apparently the freehub spingery used back in the days was the ultegra 6402:

https://si.shimano.com/pdfs/ev/EV-FH-640­2-8-1174.pdf

However, from what i can gather these parts are hard to find and buy these days, but there is an alternative which the FH-M750 can do the same jon (granted this is a 9 speed freefub) people have done this before and it works perfectly apparently.

This is also hard to find at times, but the parts number is the same in the FH-M760 so I've ordered that and hopefully this will sort the issue from my side:

https://si.shimano.com/pdfs/ev/EV-FH-M76­0-2265.pdf

Awesome work, many thanks

Would be happy to know how/if it works out!

Haha yea

and in the next step i discovered a US flag decal on the ST.

Well, got pretty much everything sorted for now, except for canti studs and chainring screws.

Added a syncros SP, an ITM stem and SORA Stis

One last detail is giving me headaches:

The frame has an integrated RD hanger, which looks pretty solid

However, when I screw on the RD, it does not seem to fit properly: the hanger mounting surface is plain while the RDs mount has recesses

Any ideas on how to solve this?

2 Attachments

Oh and the current progress

1 Attachment

Do you have a picture of the hanger without the derailer? Maybe the recesses are more to "the back"?
The recesses are there so the derailer is "fixed" doesn't turn on the thread.
The b screw should have a lip on the hanger to push against too.

Just chiming in, was 6400 the same spec as 7400? As in, could you use a 7400 series freehub?

If so, "de fietsenmaker" (the go to place for vintage parts in the benelux) has a couple 7400 series freehubs on his site.

Unfortunately this is not the case as there was a big changed from 6400 to 7400.

The 7400 freehub has that end plug that won’t be compatible for the spinergy rear free hub.

Also on my side the freehub has been replaced on my look has made its wonderful to ride and you definitely notice how smooth and engaging it is now.

Would recommend getting it replaced with the FH-M760 for anyone who owns a pair of road spinergy.

Hello! Specialized Allez (Raw) Sold?

Hi - no i still ride it - why?

@HoKe

Frankly i managed to disassemble and re-assemble my freehub and i noted that it is running fine after only having replaced the bearing balls

The problem is the larger „open“ bearing with the cone. I replaced the balls here, too, but i fear that the cone has reached the end of its lifecycle as it seems fairly rough inside

After having spent hours in this subject i decided to ask my LBS for help. Not expecting any good outcome though…

On another note, i found out that profile design and canyon sold a tiny aero bar for the h36 cockpit until 2018/19(?)

This thing seems to be quite rare but i was able to cop one at a reasonable (thats a lie) price

I think its pretty neat as you cannot see it from the side and fits the h36 perfectly

Garmin also nicely nestles in there

1 Attachment

Did some last photos of the allez sprint before i am parting ways with it

Aerobarz for the lolz

3 Attachments

Okay its happening

Frame possibly gone next weekend :-(

1 Attachment

What‘s the replacement?

Good question…

Initially i was thinking about building another CAAD MGOOF assuming i find a nice frameset (which i havent so far)

Now i am thinking to disassemble the cipollini saeco, sell all the classic parts and turn it into an mgoof

Bottom line, I think it mainly depends on whether i find a caad frameset in a nice colorway before someone buys the saeco parts off of me

into this ?

Thanks!

Its a nice frameset for sure but afaik the warrior is more touring oriented and i think id be more into a frame with horizontal TT

Touring lol !

Didnt mean to offend but i had that slogan in the back of my head

high tech road machines that emphasize performance while delivering all-day comfort