WTD: CX Fork

I need a fork for a Pompino with clearance for 32s and Guards.

I've been looking at a new Surly Cross Check or Soma CX but thought I'd see what was around before pulling the trigger:

• 1 1/8 Ahead with around 250mm of Steerer.
• V brake bosses
• Rack and Guard bosses
• 400mm ish A2C
• Etc

I have a new kaffenback fork, I'll check it against your list.. steerer uncut..

1 Attachment

Great stuff. Thank you.

Quick check.. 235mm steerer and 365mm axle to crown.. I'll stick a wheel in later with 32mm tyres and show the clearance.. PS.. image above is 32mm tyres

i have a Kinesis alloy/carbon forks with canti mounts and guard mounts, 400mm A2C, but the steerer is cut at just under 200mm

Thanks, the steerer is too short for me though.

Got a brown Pompino one from an XL frame of a Planet X carbon (alloy steerer)

From reading around I don't think a pompino fork clears 32s with Guards?

It doesn’t have a mudguard at the moment but from a rough measurement the current tyre is 40 so would have thought 32 plus mudguard would work it but don’t really know

Ah, further reading indicates there might be more than one version. How much steerer does it have?

Can confirm when/if it stops chucking it down but it’s an XL frame with plenty of spacers so think most likely uncut steerer