Home DIY

You are reading a single comment by @Nef and its replies. Click here to read the full conversation.

•

GOAThac in reply to @Nef

Sorry should have uploaded a photo instead of trying to explain badly.

So image is the bottom fused switch. I'm trying to replace it with a wifi/timer switch.

The ends of the cable are too thick tofot exactly in new timer and replicate the images circuit. Even trying to fit them in a wago 221 connector is a struggle.

Trimming the wires to fit feels like a bodge what's the correct way?

•

Nef in reply to @GOAThac

What is the load on that switch? Why can’t you just leave that switched on, or replace it with an unswitched spur, and just put the WiFi switch on the load side?

I still don’t understand what the exact situation is tbh, lol.

•

GOAThac in reply to @Nef

Ha thanks for the effort.

So if that switch is left on the immersion will draw any time the water tank gets used. I have cheap power at night so want to heat then and use in the day.

So likely load will be a 3kw heater for 3-4 hours so I want to make sure I do this right or call in a man.

About

Avatar for Nef @Nef started