You are reading a single comment by @Nelly and its replies. Click here to read the full conversation.
  • Anyone used Zinsser Bullseye 123 before? Does it need the full 7 days cure time before topcoating in emulsion?

    I'm trying to rectify a poor bathroom job by our decorators - we were ending up with loads of small bubbles after showering, likely because the undercoat wasn't fully dry before topcoating. I was able to scrape off most of the affected areas so plan was the use Bullseye - let it dry - then repaint.

  • In the 20+ years I've been using it I've rarely left it to cure for 7 days. If you are talking about walls rather than woodwork it might be worth considering a coat of Gardz from Zinsser. Your problem with bubbles could be related to filler if you've had any filler on the walls.

About

Avatar for Nelly @Nelly started