MAJs gay bikes [she’s in her fitness era]

You are reading a single comment by @Maj and its replies. Click here to read the full conversation.

•

amey in reply to @Maj

The cranks are not exactly “ceramic smooth” but they turn? I think it’s the spacers tbqh but I couldn’t be arsed to take them on and off, there is the right spacing on each, I watched the video 9x

Honestly it’s a mountain bike I’m sure the weather and mud will ruin the bb fast enough, they’re on tight, no play, and in exhausted torquing it all down

Why do you have spacers? Plus the torque on NDS plastic bolt is only for preload, pinch bolts and the pin holds them in place so if they are not moving smoothly the preload is done up more than needed.

•

Maj in reply to @amey

It’s a 68mm shell and a mtb crank, spacers to widen it

By spinning the torque cap wasn’t on, I mean “does the crank whizz round in the bb and rest at the bottom” when you put the spindle through

It doesn’t, in terms of moving it seems fine? Don’t feel any resistance/ notching

•

amey in reply to @Maj

It’s a 68mm shell

why? on an MTB?! I guess not possible to change that equation.

It doesn’t, in terms of moving it seems fine? Don’t feel any resistance/ notching

Should be fine, those cranks can take a lot of abuse, even if there is a minor play you will notice.

About

Avatar for Maj @Maj started