Cannondale Aficionados / Owners

You are reading a single comment by @littleK and its replies. Click here to read the full conversation.

•

Glws in reply to @MrBaklava

if you take the bearing out, align a short ruler against the angled part of the bearing, look at it from above over a piece of white paper, you will be able to assess if its 36 or 45.

•

littleK in reply to @Glws

The credit card trick is a good way of checking for 45 degree simply place the corner of the card through the bearing creating a V as the sides of the card are 45degrees the card will rest on the bearing with no gap if it’s 37 there will be a gap

•

Glws in reply to @littleK

yeah that works for assessing the inside bearing angle, but not a crown race on its own or the other measurements/angles of a bearing

About

Avatar for littleK @littleK started