You are reading a single comment by @Nick_S and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
@Nick_S
After much searching for custom solutions, and some head scratching, I finally found a nice solution to the mounting of a rear lamp to a Jim Blackburn rear carrier -- much neater than the old ESGE aluminium mount I used in the distant past.
The Cateye SP-11 mount is designed to fit a seat post or handlebar, but it will clamp down small enough to firmly hold the twin rods at the top-back of the rear carrier. There is some rubber damping material which allows it to conform to the shape of the rods. Fortunately, the mount will accept a much wider range of their rear lights than listed in the instructions. I took out the toothed band and reinserted it in the opposite direction which improved the fitting.
1 Attachment