You are reading a single comment by @rcbprk and its replies.
Click here to read the full conversation.
-
Do you mean you used a single sprocket taken from a cassette, and spaced it out to the correct chainline? I was planning to use something like this (actually, good reminder because it's the last thing I need to buy). Its not an issue I've anticipated tbh, but I've never run a drivetrain exactly like this before.
rcbprk
If you're planning on using a single sprocket on a cassette freehub, I hope you have better luck than I did. I noticed variable chain tension when rotating the cranks, and it was down to the sprocket not being mounted concentrically. I tried the trick with half-tight bolts and knocking the chain, but only got it slightly less eccentric. So I'm rebuilding around a proper fixed/free hub.
But this was a Miche cassette sprocket, not ideal anyway. Perhaps you're already intending to use a SS sprocket which is designed for the job?