You are reading a single comment by @Ndeipi and its replies.
Click here to read the full conversation.
-
24h, should have mentioned. I have edited my post with that info now.
I measured the hub carefully with calipers and the ERD with a tape measure, and even the rim bed thickness with the prong on the calipers.
Ndeipi-
ok, with your updated numbers, I calced DS 272 mm and NDS 277mm , only 1 mm diff. to your NDS spokes , so the spokes seem to be okay... looking at the hardware, we have a nonsymmetrical hub with different flanges, DS is heavily dished and the NDS is less dished... I think the design and combined parts add themselves up to create this difference....
HK_Berlin
aah good that u say it, what is your spoke count? I did calc it with the standard 32 holes, so I wouln't trust my above numbers too much.
I used this german site: https://speichenrechner.de/index.php