You are reading a single comment by @stevo_com and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
stevo_com
I’m sure there are chemicals that will dissolve it - but not anything you want to be around.
Scrape as much off as you can then remove hardened stuff mechanically.
There’s a sweet spot when the 2-part has hardened but not cured and it sometimes comes off in one slightly rubbery piece.
Quite satisfying.
Once you’ve sanded metal tools you’ve provided a perfect key to which subsequent filler will adhere.
It’s a bummer.