You are reading a single comment by @Bainbridge and its replies.
Click here to read the full conversation.
-
It's six years old - and it doesn't seem to be leaking out of the front. The water is appearing under the front left of the machine.
Bainbridge-
See if you can find the method to remove the front. 6 years could be about the right time for a door seal replacement. The Miele guys are very nice though. I've seen them in action and you can learn a lot about the machines very quickly. Reassuringly expensive.
-
Checked the in feed at the back? When I installed mine, I notice a small trickle of water on the floor at the front, turns out the threads for attaching the in feed were gritty and it was leaking from there.
Airhead
stevo_com
How old is it. I replaced the door rubber on mine recently and it fixed the problem. Cleaned everything else properly first though! It's a much easier job if you unscrew the front panel at the bottom and the door lock keep, then you can access it and maybe see where the water is coming from.
Assuming your machine is a similar era.