I've used a bog standard Tiagra hub and added a 5 mm spacer on the NDS. Improved the bracing angle slightly too.
Doesn't the spacer just cover the exposed part of the axle that would sit in the dropout?
I'm considering a 36H XT T780 as our frame measures 138mm but currently has an old 140mm hope hub.
Respaced the axle, which leaves 3 mm of exposed axle each side. What's wrong with the Hope?
@motoko started
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
I've used a bog standard Tiagra hub and added a 5 mm spacer on the NDS. Improved the bracing angle slightly too.