Exploding inner tubes

Posted on
Page
of 2
Prev
/ 2
  • I usually start seating the tyre with valve area, but maybe that isn't the last part you are showing in the pic.

  • Same, that picture was taken after I deflated the tire as it was coming off the rim, the other times it slipped off was not in correspondence of the valve..

  • I’ve had exactly this problem with Veloflex tyres and Vredestein latex tubes. Mine were all blowing at about 90psi. It turned out the plastic cover on my track pump had taken a small knock and was causing friction on the needle. When I was trying to get to 110psi (23mm tyres on 19mm rims) the needle would struggle to move once it got to 70psi. What was actually happening was I was pumping well past what the tube was capable of and just detonating it.

  • Good insight, I will check it out, with my other bikes my track pump seems to work just fine, nevertheless it is something worth considering

  • Post a reply
    • Bold
    • Italics
    • Link
    • Image
    • List
    • Quote
    • code
    • Preview
About

Exploding inner tubes

Posted by Avatar for alocalboy @alocalboy

Actions