-
• #27
Same, that picture was taken after I deflated the tire as it was coming off the rim, the other times it slipped off was not in correspondence of the valve..
-
• #28
I’ve had exactly this problem with Veloflex tyres and Vredestein latex tubes. Mine were all blowing at about 90psi. It turned out the plastic cover on my track pump had taken a small knock and was causing friction on the needle. When I was trying to get to 110psi (23mm tyres on 19mm rims) the needle would struggle to move once it got to 70psi. What was actually happening was I was pumping well past what the tube was capable of and just detonating it.
-
• #29
Good insight, I will check it out, with my other bikes my track pump seems to work just fine, nevertheless it is something worth considering
I usually start seating the tyre with valve area, but maybe that isn't the last part you are showing in the pic.