You are reading a single comment by @Sam_w and its replies.
Click here to read the full conversation.
-
Cheers, was thinking to use celotex, just checking there wasn’t a reason not to! Was thinking to throw up 100mm because I have the space…
Was going to batten using something like 2 x 2 on one beam, then tightly squeeze the insulation in and the fix 2 x 2 on the other side, then fix some plywood onto the 2 x 2 to work as a ceiling. Does that make some sort of sense? What depth plywood do you think I could get away with? It’s not going to have anything fixed to it.
Thanks!
Sam_w
@Sam_w
to insulate underside of roof, you can use; mineral wool; sheep's wool but these are hard to secure. foil backed PIR (polyisocyanurate) Insulation panels is the way to go.
Kingspan and Celotex both easily available and easy to cut with a bread knife, look at 100mm Kooltherm K107. you tube has fixing methods usually pinned with mechanical fixings.
12x24 battens at 600mm centres running from ridge to eaves should provide cavity space between soffit and insulation. let us know how you get on.