-
Yes I would say you can’t go wrong with the appropriate TA rings, I’ve got them on a couple of bikes too
-
Something to be aware of is the bolts. At some point Campagnolo switched to a threaded inner chain ring, which obviously requires different bolts. I'm converting 2012 Centaur Carbon Power-Torque 10-speed cranks to 11-speed using Stronglight CT2 chain rings, which are threaded while the original Centaur ones are not. I had to buy a set of FC-SR200 bolts to make it work.
It looks like the TA Nerius inner ring is not threaded, which I wish I would have known before I bought the Stronglights. TA does make a set of bolts that will work with their non-threaded chain rings, if the set of bolts that came with your crankset are for threaded chain rings. I suspect that the Campagnolo FC-RE303s (this is what my Centaur crankset came with) would also work.
Basically, if the chain rings you are replacing are threaded, buy the Stronglights. If they're not threaded, buy the TAs. (I'm a little embarrassed to say that I chose the Stronglights because I think they look better, which is a decision I regret now.)
You are reading a single comment by @Tomalex and its replies.
Click here to read the full conversation.
DrDave
Fibreglass
@Tomalex
Any recommendations for replacement chainrings for campag 5 arm cranks, specifically 2011-14 SR 110bcd?
The TA Nerius looks decent from a search