You are reading a single comment by @chrisbmx116 and its replies.
Click here to read the full conversation.
chrisbmx116-
Any further tips? Feels simple ish to me but also worried about messing it up.
There may well be a more sophisticated approach but I would place wardrobe in alcove, drill 2 holes each side at 2/3 height, mark the brick or plaster, remove wardrobe, drill and plug, then replace wardrobe and fix in place... That won't come down without ripping it down
Backstop
Will the wardrobe be sitting on the floor?
A couple of decent fixings into the brick on the sides will hold it in place, when the screw pulls tight into the panel you know it’s a goodun.
If you’re going g to fit the wardrobe tight to the alcove (leave yourself 10 -20 mm slop) painters mate will hold it in place
😆