WTB gravel/CX wheelset, tubeless, QR

As the title really; looking for a fairly inexpensive set of wheels suitable for light-moderate gravel, 700c, disc (ideally CL). Must be tubeless ready and have the necessary adapters for QR (100/130).

Cheers!

I’ve got these. Not a 100% match (6 bolt and will need front converter, available from SJS for the official novatec one or eBay/Amazon for a knock off)

https://www.wtb.com/products/frequency-cx

Novatec hubs, 11s shimano road freehub but others available from novotec

Taped for tubeless, no valves but could come with some wtb cx tyres if you’re interested?

So these would be the adapters? https://www.sjscycles.co.uk/hub-spares/novatec-front-side-caps-qr/

And I take it it would also be a case of getting hold of 2 shimano 6 bolt to CL adapters?

Have you been running them tubeless?

Ta.

Yup, think those are the ones! Can double check the hub name for you. Other option is this: https://www.sjscycles.co.uk/hub-spares/problem-solvers-thruaxle-qr-adapter-12-mm-to-qr/

Not sure you can get 6 bolt to cl adapters (cl had a smaller diameter mount) though. It is possible to go from CL or six bolt.

Yes they’ve been run tubeless, but not for a bit of time. We’re all ok when last used and held air just fine

Yeah I think you're right actually.

Ok, so really I'm budgeting £50-60 on top for rotors and adapters, so I guess it depends how much you want for them. Happy for you to PM if preferred.

Novatec d771/772, DT swiss r460 rims, set up tubeless with Nano 40c tyres in decent condition. QR f and r. 32 holes. Handbuilt by me. Freehub/bearings recently replaced.

£90/pair plus postage (roughly £10)

@sb88 PM sent