You are reading a single comment by @moog and its replies. Click here to read the full conversation.
  • I also couldn't justify buying the swing away binding attachment but have found this fixed version to be pretty good.

    https://www.aliexpress.com/item/32918421828.html?spm=a2g0s.9042311.0.0.200c4c4djwh8Ap

    Takes a bit of time to set up but for hobby use it does the job ok.

    Edit - posted at the same time as @merl
    Interesting to hear it's not working so well for you - it took some initial set up to work out the best mounting holes but I've found it works well positioned very close to the foot. The only difficulties I've had have been sewing round tight corners but I think that's more to do with my bad technique than the binding attachment.

  • This is very helpful. What foot are you using? I think I've finally found a position that works okay with my machine, but the 1" tape (definitely the correct width for the attachment) just always wants to slip down/around, usually so there's more underneath than on top.

About

Avatar for moog @moog started