You are reading a single comment by @dbr and its replies.
Click here to read the full conversation.
London Fixed Gear and Single-Speed is a community of predominantly fixed gear and single-speed cyclists in and around London, UK.
This site is supported almost exclusively by donations. Please consider donating a small amount regularly.
ILb
@dbr
240 is good. Best way to get nice finish is that, then apply oil with a micro foam roller. Once it's all oiled, wipe the surface with lots of clean rags, I use catering blue (white) roll, until it feels pretty dry and there are no streaks or wet looking bits. Wipe in the direction of the grain. No need to sand between coats.
If you didn't wipe it may be worth knocking it back with a scotchbrite pad or something like 400 grit. 2 coats should be fine, three if you can be bothered.