SOLD: Hope crankset, bb and tools

Roll up, roll up, get some anodized boutique cranks made by northerners for £90 posted in the UK.

The good:

• These are the first gen cranks, first is good
  
• They are red, which is fast
  
• They are 175mm long
  
• They come with all the proprietary tools and a spare bolt of some description
  
• You can buy all the spares, probably forever knowing Hope
  
• Very satisfying when you put all the parts back together in the correct order
  
• They were made up north
  
  

The bad:

• They are red, which might not suit your bike
  
• They need a good clean, the chainrings in particular
  
• Cranks are missing one pedal washer
  
• BB bearings feel a bit gritty, you should probably replace them
  
• There are a zillion pieces (PDF) and many steps to fit/remove these cranks, you will need to read the instructions (PDF)
  
• These aren't the Evo cranks, so if you run supermegaultraboost, they might not work, but you'll need to check that with Hope to be sure
  
  

Other things:

• Chainrings were previously used with 11 speed chain, both 28t
  
• The axle is 140mm, should work on your 68-83mm BB shells, check the nice diagram of a bottom bracket shell(PDF) and the BB compatibility chart (PDF) to be on the safe side.
  
• A handful of bb spacers will be thrown in for good measure
  
  

Detailed photos here: https://photos.app.goo.gl/7TF1bVE9CS1eL9E5A

1 Attachment