dubkev-
@Jonny69 yes positioning the pedals for takeoff is a nightmare.
Yeah you definitely don’t want that. Have a look if there’s a way to swap the coaster brake to cable operated and if it results in you being able to pedal the cranks backwards on the freewheel, as that would be your easiest way forward if it’s possible. Otherwise, 10 or more speed mtb derailleur setup would be my preference. I have a 32T NW chainring at the front and 11-34 range at the back. I know it’s more expense but it’ll make the bike far more useable.
Budget shopping list:
-Dropouts
-Budget 36-spoke 26” wheel with disc mount (or just the hub if you can lace wheels)
-Disc, caliper and lever
-MTB shifter and matching rear derailleur, or Tiagra 10-speed shifter and either any Shimano long cage road derailleur up to 10-speed or Shimano MTB derailleur up to 9-speed.
-10-speed cassette eg 11-34So you’re probably looking at £250 there if you buy all new, but you’ll get a bit back if you put the hub and shifter on eBay. Keep an eye on Retrobike for for a groupset.
Just remember you can mix and match a lot of 10-speed kit which I find makes my life easier because I can share parts between bikes. SRAM X5/X7/X9/X0 is compatible with Rival. Cassettes are same as Shimano. 10-speed Shimano road is backward compatible etc etc
Long post. I’m tired and rambling. Sorry.
You are reading a single comment by @dubkev and its replies.
Click here to read the full conversation.
Jonny69
This is what you have: https://www.fourthfloordistribution.com/products/bullitt-dropout-kit-coaster-break?_pos=5&_sid=daa1d1f49&_ss=r
This is what you need if Alfine/Nexus: https://www.fourthfloordistribution.com/products/bullitt-dropout-kit-internal-gear?_pos=1&_sid=daa1d1f49&_ss=r
This is what you need for a normal rear mech setup: https://www.fourthfloordistribution.com/products/bullitt-dropout-kit-external-gear?_pos=4&_sid=daa1d1f49&_ss=r
SBC can order this for you